No Products in the Cart
Video tutorials, step-by-step guides and care tips for your custom wrap.
Explore video tutorialsIn this video, we show you how to create your own ski or snowboard designs easily with the Sickstyle Graphics configurator. Choose from over 40 design templates, upload your own logos and customise colours and text – all with a live preview.
Watch nowThis video shows you step by step how to apply your custom Sickstyle Graphics film to your skis or snowboard. Learn the right technique for a bubble-free, professional result.
Watch nowWith the right preparation and technology, gluing on can be done in no time – in only 6 simple steps.
Clean the surface thoroughly. Remove dirt, wax and fat residues with isopropanol. The surface shall be: Clean, dry and fat-free It is the most important prerequisite.
Place the foil without removing the protective film on your ski/board to check the position. Watch for even distances to the edges.
Pull off the protective film stepwise and press the film with a doctor blade From centre to outside an. Work slowly and evenly.
Small air bubbles? Carefully prick them with a fine needle and brush out the air. In the case of larger bubbles, lift the film and press it again.
The stickers as Rectangle In order to be delivered and each ski/snowboard has a different shape, you have to cut off the excess foil around the edges. Used in an sharp cutter knife or scalpel and carefully cut along the ski/board edge. Work slowly and with uniform pressure – so you get a clean, precise contour.
Press the edges of the cut film particularly firmly. Leave the ski/board 24 hours at room temperature rest so that the adhesive completely hardens.
With these simple care tips, your design will stay as new for a long time.
After driving, wipe with a damp, soft cloth. Do not use aggressive cleaning products.
Store in a cool, dry place. Avoid direct sunlight for a long time.
Always transport skis in a ski bag. Do not place surfaces on top of each other unprotected.
Grow normally – the foil is only on the surface, not on the tread.
A new design desired? Our foils can be removed completely without residue.
Profi-Tipp: It is best to remove the film at room temperature. When cold, the glue becomes brittle and detachment is more difficult.
A doctor blade or a soft cloth, isopropanol for cleaning, a fine needle for air bubbles and a sharp cutter knife for cutting the excess foil – that’s all you need!
With a little practice, the sticking on takes about 15–30 minutes per ski or gymnastics. Snowboard. Take a little more time the first time – the result will be worth it.
We recommend sticking it on at room temperature (approx.) 18–22°C When cold, the adhesive adheres poorly and the film is less flexible.
In normal use and proper care, the slide 2–3 seasons. It is UV resistant, water resistant and scratch resistant.
Yes! Heat the foil lightly with a hairdryer and pull it off slowly. Adhesive residues can be easily removed with isopropanol.
Stick with a fine needle and brush out the air. In the case of larger bubbles, carefully lift the film and press it again.
Wipe with a wet, soft cloth. Do not use aggressive cleaning agents or solvents.
Store in a cool, dry place. Avoid direct sunlight and always transport it in a ski bag.
